APTP Articles

3 Things to Remember During an IR Inspection

If you’re using an IR thermography camera for inspection and data capture, accuracy is key. Whether you’re an experienced thermographer, or new to the game, this is a friendly reminder from FLIR to always remember ‘FORD’ first.

None of these situations are repairable in software or on the camera once a thermal image has been saved:

Next time you’re conducting an IR inspection, keep these parameters in mind to ensure you’ll be able to analyse your images properly: the thermal camera must be in Focus, taken with the correct temperature Range and at an appropriate working Distance from the target.

While some things, such as thermal tuning and color palette can be adjusted in FLIR Tools with post-processing, the parameters of FORD cannot be changed after the fact and thus are critical to get right before saving any IR image. So, save yourself the time upfront,
and always check FORD first:

LEFT: Must be in Focus RIGHT: Taken with the correct temperature Range

Focus—the ‘FO’ in FORD

Focus—the ‘FO’ in FORD, you must focus carefully before storing an image, because you can’t re-focus later. Just like with any camera, you must optically focus before capturing an image to avoid blurry images, which not only look unprofessional, but also produce inaccurate temperature measurements. To avoid this, always double check the camera’s focus before you take any IR image to achieve an end-result with optimal target focus, because there’s nothing you can do to correct this after the fact.

Good focus = better measurement,
that simple.

Range—the ‘R’ in FORD

Range—the ‘R’ in FORD, the temperatures of the object you plan to measure must be within the range setting you choose prior to capturing your image. While many infrared cameras claim to be able to detect and measure objects from –20°C to 1500°C, they cannot do it within the temperature limits of a single image.

Most modern infrared cameras therefore break up the total temperature measurement specification into a number of defined temperature ranges covering intervals of temperatures that the detector is able to see and image without going into saturation. When an image is saved, all the data within a particular range is captured. Any temperature points which fall outside of that range, however, are not. So, being in the right temperature range before you save an image is critical.

Teledyne FLIR